Elixir Electronics
Elixir Electronics
West Mambalam, Chennai, Tamil Nadu
Our Products

Distributed type paging & Talkback system

System Configuration:
a). Handset Type of field station set includes the following 5 items:
1). Field station model: PPT9000HS (1 No.) 2). MS Enclosure (1 No.) 3). Station JB (1 No.) 4). Speaker JB (1 No.) 5). Paging Horn Speaker (1 No.) - Rs.26,000=00 Per Set.
b). Pilferproof Type of field stationset includes the following 5 items:
1). Field station model: PPT9000PP (1 No.) 2). MS Enclosure (1 No.) 3). Station JB (1 No.) 4). Speaker JB (1 No.) 5). Paging Horn Speaker (1 No.) - Rs.26,000=00 Per Set.
c). Desktop station set includes the following 5 items:
1). Desktop station model: PPT9000DS (1 No.) 2). Power supply unit model: PPT9000PS (1 No.) 3). Station JB (1 No.) 4). Speaker JB (1 No.) 5). Paging Box Speaker (1 No.) - Rs.26,000=00 Per Set.

Note:
1). Select any number of Handset Type of field station set or Pilferproof Type of
field station
set or Desktop station set or combination of all the three types as per requirement.

2). Rate & Delivery period for 3 types of cables will be sent on enquiry.

Description:
The system consists of a number of wall mounting stations – either Handset type or Pilferproof type or a mix of both - located at various places. Each wall mounting station is extended 230 V AC / 110 V AC or 24 V DC depending on the input power supply setting.

Cables : The system requires the following types of cables.

a). Signal cable: 6 core, 0.5 sq. mm ATC over all pvc sheathed armoured cable for audio signal inter-connection.
b). Power supply cable: 3 core, 1.5 sq. mm ATC overall pvc sheathed armoured cable for power supply
connection.
c). Loudspeaker Cable: 2 core 0.75 sq.mm ATC overall pvc sheathed armoured cable for inter-connecting the
paging unit with the loudspeaker.

6 core armoured cable is laid between each and every wall mounting station and terminated in the station
junction box and the cable terminals are inter-connected to the wall mounting station. The power supply cable is laid between each and every wall mounting station and terminated in the station junction box and the cable terminals are inter-connected to the wall mounting station. The amplified page power output of each wall mounting station is connected to a unit horn combination speaker through a speaker junction box.

Operation of the system: When a person wishes to page another person, he lifts the handset, holds the ‘Page’ switch & announces the person to be contacted. A gong tone precedes every announcement.

The announcement is heard through all speakers connected to the wall mounting stations; the called person goes to the nearest paging station, lifts the handset and responds to the call. At this moment the calling and called persons get connected in private conversation mode i.e., the discussion among them is only heard in their handsets and it is not heard publicly in the loudspeakers. The system is ready for some other person to make a page call. This type of operation of Industrial Public Address system is known as DISTRIBUTED TYPE OF SYSTEM. In this system of operation, there is no operator and the personnel at every station can page and communicate on their own.


Audio Communication System -
Industrial Telephone with built-in Page Amplifier

This system consists of an Epabx unit located in the control room. All the field industrial telephones have built-in page

amplifier and are provided with a noise – cancelling type handset. These are connected to the EPABX unit. 230 V AC

power supply is extended to the EPABX unit.

 

The field operator lifts the handset and dials the required extension number. The input stage senses the incoming

call and shifts the line to page amplifier board. The ring back stops and the calling party makes the paging

announcement through his telephone. This announcement is amplified in the particular field call station (FCS) and

heard through the page loudspeaker connected to it.

 

If the called person picks up the FCS handset while the announcement is in progress, then the calling and called

persons get connected for conversation in pvt. Mode. In case the calling person disconnects the line after making

the page announcement, the called person can dial the no. of the earlier caller from any FCS, make a page

announcement and proceed to talk to him.

 

The master operator can, through the operator console

1). Access all the field call stations individually

2). Make zone wise page announcement

3). Make all – zone announcement.

The Field Operator of any FCS can

1). Make a page announcement to individual FCS

2). Make zone wise page announcement (except the zone in which the particular FCS is included)

3). Make all-zone page announcement (except the zone in which the particular FCS is included)

 

Other standard features of a digital system are available in this epabx system.

Pricing Details :

1). EPABX Unit - 25 Extensions - 1 No. - Rs.2,00,000=00 each.

2). Indl. Telephone with Built in Page Amplifier - Elixir Model: ETU8000HS - Qty as Reqd -  Rs.20,000=00 each.

3). Zone Selector Unit - 1No. - Rs.50,000=00 each.

4). Desktop Telephone (commercial version) Amplifier & Speaker  - Qty as Reqd - Rs.20,000=00 each.


5). Telephone cables - 2 pair, 5 pair, 10 pair, 20 pair etc. - On request

6). VAT Extra.

We are a trusted name in the industry for manufacturing and supplying Steel Plant Communication System. The offered product is highly regarded for its unparalleled features and durability. It is used in industries for addressing huge number of workers for proper streamlining of the production unit. The offered handset is provided with a highly sensitive noise cancel device for ruling out background disturbances.

PPT 9000 HS:


We provide Design for Industrial Paging and Talkback System, PA System for Auditorium, Places of worship, Schools, Colleges and commercial establishments. We have experienced engineers for design and configuration of systems, installation and commissioning jobs. We also provide effective backup service during and beyond guarantee period.

Features:

Announcement through mic of the zone console:

Select the required zone, say zone 1. Speak through the Mic of the Zone console. This announcement will be heard through all the speakers in zone 1. Similarly, announcement to the other 5 zones and All – Call can be made.

Announcement through EPABX:

The EPABX unit is connected to all the industrial telephone extensions in the field. All the normal intercom functions happen between the extensions connected to the EPABX.

Page announcement through EPABX extensions is done as given below.

For 6 zone paging, six nos. of telephones interface units (TIUs) are used.

For the six zones, six telephone extension numbers are assigned and each telephone extension is connected to a TIU. The audio output from each of the six TIUs is fed to the amplifiers of zone 1 to zone 6.

Suppose, the operator wishes to make page announcement to zone 1. He lifts the handset of his telephone extension and dials extension number, say 201, assigned to zone 1 paging. The call lands at TIU 1, the ringing stops and now the operator can announce the message. This announcement is heard thro' all the speakers in zone 1 area.

For all other zones, a similar procedure should be adopted.

For all zone paging, the operator should dial the extension, say 207, assigned to all zone paging and proceed as before. The announcement will be heard in all the zones.

The field operators can also make zone wise paging or all zone paging by following the procedure indicated above.

* The Plant-wide BGM and Announcement System is an IP based Public Address System.

* This PA System consists of a microphone through which announcements are made. The mic is connected to an Input Interface Unit (IIU) and terminated in the LAN Network.

* The Output Interface Unit (OIU) is connected to the LAN network wherever loudspeaker are to be located are required. The audio output from the OIU is fed to an amplifier and loudspeakers are connected to the amplifer output terminals.

* OIUs can be connected to the LAN at number of points where loudspeakes are to be fixed. The audio output from each OIU should be fed to an amplifier with loudspeakers.

* PC / Server with application Console and software are supplied for operation of the PA system through LAN Network.

* IIUs can be provided at other points in the LAN networks where mics or music sources are located for broadcast.

* The PA System through LAN can be provided to the industries at less captial investment in view of availability of LAN network.

* Background music, general announcements and emergency announcements can be made through the LAN PA system.

* The area of usage is spread out widely and can be employed in workshops, schools, offices etc.

* The Plant-wide BGM and Announcement System is an IP based Public Address System.

* This PA System consists of a microphone through which announcements are made. The mic is connected to an Input Interface Unit (IIU) and terminated in the LAN Network.

* The Output Interface Unit (OIU) is connected to the LAN network wherever loudspeaker are to be located are required. The audio output from the OIU is fed to an amplifier and loudspeakers are connected to the amplifer output terminals.

* OIUs can be connected to the LAN at number of points where loudspeakes are to be fixed. The audio output from each OIU should be fed to an amplifier with loudspeakers.

* PC / Server with application Console and software are supplied for operation of the PA system through LAN Network.

* IIUs can be provided at other points in the LAN networks where mics or music sources are located for broadcast.

* The PA System through LAN can be provided to the industries at less captial investment in view of availability of LAN network.

* Background music, general announcements and emergency announcements can be made through the LAN PA system.

* The area of usage is spread out widely and can be employed in workshops, schools, offices etc.

Central exchange type paging & talkback system: The Microcontroller based central exchange paging & talkback system consists of:a) Desktop operator console with LCD;b) Central exchange–Microcontroller unit for 20 FCSs;d) Power supply unit in 19” sub-rack & Rack assembly for mounting the items b, c & d. 
Desktop operator console–Micro controller based-with LCD display:Selective, Conf., Group,All call, Emergency siren, comm. with the FCSs in different groups, Date / Time Updation, standby operation, Alert Tone & Display of calling FCS ID (No.), soft keypad, Ergonomic design are the main features. Available in 20/40/60 FCSs/Zones versions. Powder coated MS enclosure provided. Available in Handset / Gooseneck mic models.
Cables :a).Signal cable - 6 core 0.5 sq.mm ATC overall pvc sheathed armoured cable;b).Power supply cable - 3 core 1.5 sq.mm ATC overall pvc sheathed armoured cable:c).Loudspeaker Cable - 2 core 0.75 sq.mm ATC overall pvc sheathed armoured cable.
Connection: 6 core 0.5sq.mm ATC armoured cable from each FCS is terminated at the MJB. The MJB has terminals for connecting page,private & FS cables. The power supply is extended to all FCSs. The page o/p of each FCS is fed to the page horn speaker thro' a speaker junction box.
System Operation:
1). FCS to Master Control Station (MCS): To talk to operator, the field person lifts the FCS handset & presses the FS switch. An audio beep & a blinking LED attracts the attention of the MCS Operator. The numeric ID of the calling FCS is also seen in the LCD in the MCS. If more than one FCS is calling the MCS operator, all the numeric IDs of the calling FCS are on the LCD. Simultaneously an audio beep and a blinking LED is also present. The MCS operator determines the priority by which the FCS are to be contacted. Accordingly he selects the particular top priority FCS from the calling FCS units. The operator converses with the selected FCS in private Mode. Once the call with the FCS is over, the MCS operator selects the next FCS on priority. 2). MCS to FCSs:To talk to a particular FCS, the MCS man lifts the handset & keys in the numeric ID of that FCS; an announcement is heard thro' the page speaker of that FCS. If the FCS operator is nearby, he lifts the handset of the FCS and converses with the MCS operator in pvt. mode. Once the call is over, the handsets are put back in normal position. An alert tone precedes all paging announcements from the console. 3). FCS to FCS : FCS in a particular group/zone can call on page mode the FCSs within the group / zone and converse in private mode. The basic operation of page & party conversation within the zone can be done by all the FCSs in the zone. Whenever a page announcement is made from the zone, it is heard in all the speakers of the other stations in the zone. The wanted person can go to the nearest FCS and talk in private mode. The private conversation now taking place can be heard by any other FCS operator in the zone and can take part in the private conversation, if necessary. The existence of private conversation can be seen by the glow of private LED in all the field stations irrespective of whether a particular FCS operator is taking part in private conversation or not. 4). Additional functions by MCS operator: a). The MCS operator can call a group or groups or all the groups & make a page call or any other announcement as required. An alert tone precedes all paging announcements from the MCS. b). The MCS operator can initiate a siren which will be heard through the page loudspeakers in all the FCS. c). The MCS operator can initiate safety messages thro' an interface unit. * Price indicated is for 1 piece of Central Exchange MCS MJB.

 
Welcome to

Elixir Electronics

Elixir Electronics :
* Established in 1977
* Successfully functioning as the manufacturer of Industrial Audio Communication - Paging & Talk back - systems, system integrator, supplier and trader of industrial electronic processing and test & measuring equipments.
* Our product range is wide and comprehensive including Industrial Public Address Systems, Cement Plant Communication Systems and Steel Plant
Communication Systems.

* Our products are highly regarded for being durable, effective in performance and latest in technology.

* Our products are widely used in process industries including cement, steel, chemical, petrochemical, paper, sugar, ferro-alloy, power, department of
railways, department of space, department of atomic energy etc.

* We have the privilege of supplying to organizations such as BHEL, ICF,BEML Chettinad Cement, Dalmia Cement, India Cement, NLC, ETPS, DCW etc.. to
name a few.



Read More...
 

Elixir ElectronicsElixir Electronics


 

 

Send SMS
Elixir Electronics
Sudharsan A R  (CEO)
No. 17/9, Krishnamurthy Street, Off. Station Road, West Mambalam
Chennai - 600033 , Tamil Nadu , India
Send E-mail