Elixir Electronics

• FEATURES:
  
  1. Frequency Response 200Hz - 10KHz
  2.  THD <1% 
  3. Body LM6 Aluminium alloy 
  4. Power Supply 90 - 270V AC 50Hz. 
  5. Page power 6W rms Class-D amplifier.
  6. Alert Tone 
  7. Audio Paging and Talk-back.
  
  Noise canceling type Handset for duplex communication. 
  
  
  Application & Usage: The Wall mounting Handset station is part of the audio paging & talkback communication system employed in process industries for purpose of passing instructions to field operators and for emergency / safety announcements.
  
  Accessories:
  
  • Station junction box - 1 No.
  • Horn speaker unit - 1 No.
  • Speaker junction box - 1 No.
  • Powder Coated MS Canopy type enclosure - 1 No.
  
  MICROPHONE:
  Type-> Dynamic,NoiseCanceling
  Internal Impedance->300Ω @ 1 KHz Sensitivity -> 56 dB @ 1 KHz relative to 1V/Pa
  
  RECEIVER: Type -> Dynamic
  Internal Impedance -> 300Ω @ 1 Khz
  SPL->108 dB @ 1 Khz
  
  
  LINE AMPLIFIER SECTION:
  Input Sensitivity -> 1 mV to 5mV (adjustable) Input Impedence ->4,7 K (resistive) Load Impedence -> 250Ω, Balanced (Resistive)
  Output-> 2V RMS
  Distortion <1% @ 1 KHz
  Residual Noise Level -50dB
  Frequency Response 200 Hz - 10 KHz, ± 3 dB
  Gong tone Frequency 600 Hz ± 100 Hz
  Gong tone Duration 1.5 Secs (app.)
  
  
  POWER AMPLIFIER SECTION:
  Input Sensitivity 500 mV RMS @1 KHz
  Input Impedence 250Ω (resistive)
  Distortion <1% @ 1 KHz
  Residual Noise Level -60dB
  Frequency Response 200 Hz - 10 KHz, ± 3 dB 
  Output Power 15W RMS @ 1KHz
  Production   Short Circuit & Thermsl Overload.
  
  
  POWER SUPPLY:
  Supply voltage  90-270v AC.
  Power Consumption - 24VA.

• FEATURES:
  
  1. Frequency Response 200Hz - 10KHz
  2.  THD <1% 
  3. Body LM6 Aluminium alloy 
  4. Power Supply 90 - 270V AC 50Hz. 
  5. Page power 6W rms Class-D amplifier.
  6. Alert Tone 
  7. Audio Paging and Talk-back.
  
  Noise canceling type Handset for duplex communication. 
  
  
  Application & Usage: The Wall mounting Handset station is part of the audio paging & talkback communication system employed in process industries for purpose of passing instructions to field operators and for emergency / safety announcements.
  
  Accessories:
  
  • Station junction box - 1 No.
  • Horn speaker unit - 1 No.
  • Speaker junction box - 1 No.
  • Powder Coated MS Canopy type enclosure - 1 No.
  
  MICROPHONE:
  Type-> Dynamic,NoiseCanceling
  Internal Impedance->300Ω @ 1 KHz Sensitivity -> 56 dB @ 1 KHz relative to 1V/Pa
  
  RECEIVER: Type -> Dynamic
  Internal Impedance -> 300Ω @ 1 Khz
  SPL->108 dB @ 1 Khz
  
  
  LINE AMPLIFIER SECTION:
  Input Sensitivity -> 1 mV to 5mV (adjustable) Input Impedence ->4,7 K (resistive) Load Impedence -> 250Ω, Balanced (Resistive)
  Output-> 2V RMS
  Distortion <1% @ 1 KHz
  Residual Noise Level -50dB
  Frequency Response 200 Hz - 10 KHz, ± 3 dB
  Gong tone Frequency 600 Hz ± 100 Hz
  Gong tone Duration 1.5 Secs (app.)
  
  
  POWER AMPLIFIER SECTION:
  Input Sensitivity 500 mV RMS @1 KHz
  Input Impedence 250Ω (resistive)
  Distortion <1% @ 1 KHz
  Residual Noise Level -60dB
  Frequency Response 200 Hz - 10 KHz, ± 3 dB 
  Output Power 15W RMS @ 1KHz
  Production   Short Circuit & Thermsl Overload.
  
  
  POWER SUPPLY:
  Supply voltage  90-270v AC.
  Power Consumption - 24VA.

• FEATURES:
  
  1. Frequency Response 200Hz - 10KHz
  2.  THD <1% 
  3. Body LM6 Aluminium alloy 
  4. Power Supply 90 - 270V AC 50Hz. 
  5. Page power 6W rms Class-D amplifier.
  6. Alert Tone 
  7. Audio Paging and Talk-back.
  
  Noise canceling type Handset for duplex communication. 
  
  
  Application & Usage: The Wall mounting Handset station is part of the audio paging & talkback communication system employed in process industries for purpose of passing instructions to field operators and for emergency / safety announcements.
  
  Accessories:
  
  • Station junction box - 1 No.
  • Horn speaker unit - 1 No.
  • Speaker junction box - 1 No.
  • Powder Coated MS Canopy type enclosure - 1 No.
  
  MICROPHONE:
  Type-> Dynamic,NoiseCanceling
  Internal Impedance->300Ω @ 1 KHz Sensitivity -> 56 dB @ 1 KHz relative to 1V/Pa
  
  RECEIVER: Type -> Dynamic
  Internal Impedance -> 300Ω @ 1 Khz
  SPL->108 dB @ 1 Khz
  
  
  LINE AMPLIFIER SECTION:
  Input Sensitivity -> 1 mV to 5mV (adjustable) Input Impedence ->4,7 K (resistive) Load Impedence -> 250Ω, Balanced (Resistive)
  Output-> 2V RMS
  Distortion <1% @ 1 KHz
  Residual Noise Level -50dB
  Frequency Response 200 Hz - 10 KHz, ± 3 dB
  Gong tone Frequency 600 Hz ± 100 Hz
  Gong tone Duration 1.5 Secs (app.)
  
  
  POWER AMPLIFIER SECTION:
  Input Sensitivity 500 mV RMS @1 KHz
  Input Impedence 250Ω (resistive)
  Distortion <1% @ 1 KHz
  Residual Noise Level -60dB
  Frequency Response 200 Hz - 10 KHz, ± 3 dB 
  Output Power 15W RMS @ 1KHz
  Production   Short Circuit & Thermsl Overload.
  
  
  POWER SUPPLY:
  Supply voltage  90-270v AC.
  Power Consumption - 24VA.

• FEATURES:
  
  1. Frequency Response 200Hz - 10KHz
  2.  THD <1% 
  3. Body LM6 Aluminium alloy 
  4. Power Supply 90 - 270V AC 50Hz. 
  5. Page power 6W rms Class-D amplifier.
  6. Alert Tone 
  7. Audio Paging and Talk-back.
  
  Noise canceling type Handset for duplex communication. 
  
  
  Application & Usage: The Wall mounting Handset station is part of the audio paging & talkback communication system employed in process industries for purpose of passing instructions to field operators and for emergency / safety announcements.
  
  Accessories:
  
  • Station junction box - 1 No.
  • Horn speaker unit - 1 No.
  • Speaker junction box - 1 No.
  • Powder Coated MS Canopy type enclosure - 1 No.
  
  MICROPHONE:
  Type-> Dynamic,NoiseCanceling
  Internal Impedance->300Ω @ 1 KHz Sensitivity -> 56 dB @ 1 KHz relative to 1V/Pa
  
  RECEIVER: Type -> Dynamic
  Internal Impedance -> 300Ω @ 1 Khz
  SPL->108 dB @ 1 Khz
  
  
  LINE AMPLIFIER SECTION:
  Input Sensitivity -> 1 mV to 5mV (adjustable) Input Impedence ->4,7 K (resistive) Load Impedence -> 250Ω, Balanced (Resistive)
  Output-> 2V RMS
  Distortion <1% @ 1 KHz
  Residual Noise Level -50dB
  Frequency Response 200 Hz - 10 KHz, ± 3 dB
  Gong tone Frequency 600 Hz ± 100 Hz
  Gong tone Duration 1.5 Secs (app.)
  
  
  POWER AMPLIFIER SECTION:
  Input Sensitivity 500 mV RMS @1 KHz
  Input Impedence 250Ω (resistive)
  Distortion <1% @ 1 KHz
  Residual Noise Level -60dB
  Frequency Response 200 Hz - 10 KHz, ± 3 dB 
  Output Power 15W RMS @ 1KHz
  Production   Short Circuit & Thermsl Overload.
  
  
  POWER SUPPLY:
  Supply voltage  90-270v AC.
  Power Consumption - 24VA.

• FEATURES:
  
  1. Frequency Response 200Hz - 10KHz
  2.  THD <1% 
  3. Body LM6 Aluminium alloy 
  4. Power Supply 90 - 270V AC 50Hz. 
  5. Page power 6W rms Class-D amplifier.
  6. Alert Tone 
  7. Audio Paging and Talk-back.
  
  Noise canceling type Handset for duplex communication. 
  
  
  Application & Usage: The Wall mounting Handset station is part of the audio paging & talkback communication system employed in process industries for purpose of passing instructions to field operators and for emergency / safety announcements.
  
  Accessories:
  
  • Station junction box - 1 No.
  • Horn speaker unit - 1 No.
  • Speaker junction box - 1 No.
  • Powder Coated MS Canopy type enclosure - 1 No.
  
  MICROPHONE:
  Type-> Dynamic,NoiseCanceling
  Internal Impedance->300Ω @ 1 KHz Sensitivity -> 56 dB @ 1 KHz relative to 1V/Pa
  
  RECEIVER: Type -> Dynamic
  Internal Impedance -> 300Ω @ 1 Khz
  SPL->108 dB @ 1 Khz
  
  
  LINE AMPLIFIER SECTION:
  Input Sensitivity -> 1 mV to 5mV (adjustable) Input Impedence ->4,7 K (resistive) Load Impedence -> 250Ω, Balanced (Resistive)
  Output-> 2V RMS
  Distortion <1% @ 1 KHz
  Residual Noise Level -50dB
  Frequency Response 200 Hz - 10 KHz, ± 3 dB
  Gong tone Frequency 600 Hz ± 100 Hz
  Gong tone Duration 1.5 Secs (app.)
  
  
  POWER AMPLIFIER SECTION:
  Input Sensitivity 500 mV RMS @1 KHz
  Input Impedence 250Ω (resistive)
  Distortion <1% @ 1 KHz
  Residual Noise Level -60dB
  Frequency Response 200 Hz - 10 KHz, ± 3 dB 
  Output Power 15W RMS @ 1KHz
  Production   Short Circuit & Thermsl Overload.
  
  
  POWER SUPPLY:
  Supply voltage  90-270v AC.
  Power Consumption - 24VA.

• FEATURES:
  
  1. Frequency Response 200Hz - 10KHz
  2.  THD <1% 
  3. Body LM6 Aluminium alloy 
  4. Power Supply 90 - 270V AC 50Hz. 
  5. Page power 6W rms Class-D amplifier.
  6. Alert Tone 
  7. Audio Paging and Talk-back.
  
  Noise canceling type Handset for duplex communication. 
  
  
  Application & Usage: The Wall mounting Handset station is part of the audio paging & talkback communication system employed in process industries for purpose of passing instructions to field operators and for emergency / safety announcements.
  
  Accessories:
  
  • Station junction box - 1 No.
  • Horn speaker unit - 1 No.
  • Speaker junction box - 1 No.
  • Powder Coated MS Canopy type enclosure - 1 No.
  
  MICROPHONE:
  Type-> Dynamic,NoiseCanceling
  Internal Impedance->300Ω @ 1 KHz Sensitivity -> 56 dB @ 1 KHz relative to 1V/Pa
  
  RECEIVER: Type -> Dynamic
  Internal Impedance -> 300Ω @ 1 Khz
  SPL->108 dB @ 1 Khz
  
  
  LINE AMPLIFIER SECTION:
  Input Sensitivity -> 1 mV to 5mV (adjustable) Input Impedence ->4,7 K (resistive) Load Impedence -> 250Ω, Balanced (Resistive)
  Output-> 2V RMS
  Distortion <1% @ 1 KHz
  Residual Noise Level -50dB
  Frequency Response 200 Hz - 10 KHz, ± 3 dB
  Gong tone Frequency 600 Hz ± 100 Hz
  Gong tone Duration 1.5 Secs (app.)
  
  
  POWER AMPLIFIER SECTION:
  Input Sensitivity 500 mV RMS @1 KHz
  Input Impedence 250Ω (resistive)
  Distortion <1% @ 1 KHz
  Residual Noise Level -60dB
  Frequency Response 200 Hz - 10 KHz, ± 3 dB 
  Output Power 15W RMS @ 1KHz
  Production   Short Circuit & Thermsl Overload.
  
  
  POWER SUPPLY:
  Supply voltage  90-270v AC.
  Power Consumption - 24VA.

• FEATURES:
  
  1. Frequency Response 200Hz - 10KHz
  2.  THD <1% 
  3. Body LM6 Aluminium alloy 
  4. Power Supply 90 - 270V AC 50Hz. 
  5. Page power 6W rms Class-D amplifier.
  6. Alert Tone 
  7. Audio Paging and Talk-back.
  
  Noise canceling type Handset for duplex communication. 
  
  
  Application & Usage: The Wall mounting Handset station is part of the audio paging & talkback communication system employed in process industries for purpose of passing instructions to field operators and for emergency / safety announcements.
  
  Accessories:
  
  • Station junction box - 1 No.
  • Horn speaker unit - 1 No.
  • Speaker junction box - 1 No.
  • Powder Coated MS Canopy type enclosure - 1 No.
  
  MICROPHONE:
  Type-> Dynamic,NoiseCanceling
  Internal Impedance->300Ω @ 1 KHz Sensitivity -> 56 dB @ 1 KHz relative to 1V/Pa
  
  RECEIVER: Type -> Dynamic
  Internal Impedance -> 300Ω @ 1 Khz
  SPL->108 dB @ 1 Khz
  
  
  LINE AMPLIFIER SECTION:
  Input Sensitivity -> 1 mV to 5mV (adjustable) Input Impedence ->4,7 K (resistive) Load Impedence -> 250Ω, Balanced (Resistive)
  Output-> 2V RMS
  Distortion <1% @ 1 KHz
  Residual Noise Level -50dB
  Frequency Response 200 Hz - 10 KHz, ± 3 dB
  Gong tone Frequency 600 Hz ± 100 Hz
  Gong tone Duration 1.5 Secs (app.)
  
  
  POWER AMPLIFIER SECTION:
  Input Sensitivity 500 mV RMS @1 KHz
  Input Impedence 250Ω (resistive)
  Distortion <1% @ 1 KHz
  Residual Noise Level -60dB
  Frequency Response 200 Hz - 10 KHz, ± 3 dB 
  Output Power 15W RMS @ 1KHz
  Production   Short Circuit & Thermsl Overload.
  
  
  POWER SUPPLY:
  Supply voltage  90-270v AC.
  Power Consumption - 24VA.

• FEATURES:
  
  1. Frequency Response 200Hz - 10KHz
  2.  THD <1% 
  3. Body LM6 Aluminium alloy 
  4. Power Supply 90 - 270V AC 50Hz. 
  5. Page power 6W rms Class-D amplifier.
  6. Alert Tone 
  7. Audio Paging and Talk-back.
  
  Noise canceling type Handset for duplex communication. 
  
  
  Application & Usage: The Wall mounting Handset station is part of the audio paging & talkback communication system employed in process industries for purpose of passing instructions to field operators and for emergency / safety announcements.
  
  Accessories:
  
  • Station junction box - 1 No.
  • Horn speaker unit - 1 No.
  • Speaker junction box - 1 No.
  • Powder Coated MS Canopy type enclosure - 1 No.
  
  MICROPHONE:
  Type-> Dynamic,NoiseCanceling
  Internal Impedance->300Ω @ 1 KHz Sensitivity -> 56 dB @ 1 KHz relative to 1V/Pa
  
  RECEIVER: Type -> Dynamic
  Internal Impedance -> 300Ω @ 1 Khz
  SPL->108 dB @ 1 Khz
  
  
  LINE AMPLIFIER SECTION:
  Input Sensitivity -> 1 mV to 5mV (adjustable) Input Impedence ->4,7 K (resistive) Load Impedence -> 250Ω, Balanced (Resistive)
  Output-> 2V RMS
  Distortion <1% @ 1 KHz
  Residual Noise Level -50dB
  Frequency Response 200 Hz - 10 KHz, ± 3 dB
  Gong tone Frequency 600 Hz ± 100 Hz
  Gong tone Duration 1.5 Secs (app.)
  
  
  POWER AMPLIFIER SECTION:
  Input Sensitivity 500 mV RMS @1 KHz
  Input Impedence 250Ω (resistive)
  Distortion <1% @ 1 KHz
  Residual Noise Level -60dB
  Frequency Response 200 Hz - 10 KHz, ± 3 dB 
  Output Power 15W RMS @ 1KHz
  Production   Short Circuit & Thermsl Overload.
  
  
  POWER SUPPLY:
  Supply voltage  90-270v AC.
  Power Consumption - 24VA.

• FEATURES:
  
  1. Frequency Response 200Hz - 10KHz
  2.  THD <1% 
  3. Body LM6 Aluminium alloy 
  4. Power Supply 90 - 270V AC 50Hz. 
  5. Page power 6W rms Class-D amplifier.
  6. Alert Tone 
  7. Audio Paging and Talk-back.
  
  Noise canceling type Handset for duplex communication. 
  
  
  Application & Usage: The Wall mounting Handset station is part of the audio paging & talkback communication system employed in process industries for purpose of passing instructions to field operators and for emergency / safety announcements.
  
  Accessories:
  
  • Station junction box - 1 No.
  • Horn speaker unit - 1 No.
  • Speaker junction box - 1 No.
  • Powder Coated MS Canopy type enclosure - 1 No.
  
  MICROPHONE:
  Type-> Dynamic,NoiseCanceling
  Internal Impedance->300Ω @ 1 KHz Sensitivity -> 56 dB @ 1 KHz relative to 1V/Pa
  
  RECEIVER: Type -> Dynamic
  Internal Impedance -> 300Ω @ 1 Khz
  SPL->108 dB @ 1 Khz
  
  
  LINE AMPLIFIER SECTION:
  Input Sensitivity -> 1 mV to 5mV (adjustable) Input Impedence ->4,7 K (resistive) Load Impedence -> 250Ω, Balanced (Resistive)
  Output-> 2V RMS
  Distortion <1% @ 1 KHz
  Residual Noise Level -50dB
  Frequency Response 200 Hz - 10 KHz, ± 3 dB
  Gong tone Frequency 600 Hz ± 100 Hz
  Gong tone Duration 1.5 Secs (app.)
  
  
  POWER AMPLIFIER SECTION:
  Input Sensitivity 500 mV RMS @1 KHz
  Input Impedence 250Ω (resistive)
  Distortion <1% @ 1 KHz
  Residual Noise Level -60dB
  Frequency Response 200 Hz - 10 KHz, ± 3 dB 
  Output Power 15W RMS @ 1KHz
  Production   Short Circuit & Thermsl Overload.
  
  
  POWER SUPPLY:
  Supply voltage  90-270v AC.
  Power Consumption - 24VA.

• FEATURES:
  
  1. Frequency Response 200Hz - 10KHz
  2.  THD <1% 
  3. Body LM6 Aluminium alloy 
  4. Power Supply 90 - 270V AC 50Hz. 
  5. Page power 6W rms Class-D amplifier.
  6. Alert Tone 
  7. Audio Paging and Talk-back.
  
  Noise canceling type Handset for duplex communication. 
  
  
  Application & Usage: The Wall mounting Handset station is part of the audio paging & talkback communication system employed in process industries for purpose of passing instructions to field operators and for emergency / safety announcements.
  
  Accessories:
  
  • Station junction box - 1 No.
  • Horn speaker unit - 1 No.
  • Speaker junction box - 1 No.
  • Powder Coated MS Canopy type enclosure - 1 No.
  
  MICROPHONE:
  Type-> Dynamic,NoiseCanceling
  Internal Impedance->300Ω @ 1 KHz Sensitivity -> 56 dB @ 1 KHz relative to 1V/Pa
  
  RECEIVER: Type -> Dynamic
  Internal Impedance -> 300Ω @ 1 Khz
  SPL->108 dB @ 1 Khz
  
  
  LINE AMPLIFIER SECTION:
  Input Sensitivity -> 1 mV to 5mV (adjustable) Input Impedence ->4,7 K (resistive) Load Impedence -> 250Ω, Balanced (Resistive)
  Output-> 2V RMS
  Distortion <1% @ 1 KHz
  Residual Noise Level -50dB
  Frequency Response 200 Hz - 10 KHz, ± 3 dB
  Gong tone Frequency 600 Hz ± 100 Hz
  Gong tone Duration 1.5 Secs (app.)
  
  
  POWER AMPLIFIER SECTION:
  Input Sensitivity 500 mV RMS @1 KHz
  Input Impedence 250Ω (resistive)
  Distortion <1% @ 1 KHz
  Residual Noise Level -60dB
  Frequency Response 200 Hz - 10 KHz, ± 3 dB 
  Output Power 15W RMS @ 1KHz
  Production   Short Circuit & Thermsl Overload.
  
  
  POWER SUPPLY:
  Supply voltage  90-270v AC.
  Power Consumption - 24VA.

• FEATURES:
  
  1. Frequency Response 200Hz - 10KHz
  2.  THD <1% 
  3. Body LM6 Aluminium alloy 
  4. Power Supply 90 - 270V AC 50Hz. 
  5. Page power 6W rms Class-D amplifier.
  6. Alert Tone 
  7. Audio Paging and Talk-back.
  
  Noise canceling type Handset for duplex communication. 
  
  
  Application & Usage: The Wall mounting Handset station is part of the audio paging & talkback communication system employed in process industries for purpose of passing instructions to field operators and for emergency / safety announcements.
  
  Accessories:
  
  • Station junction box - 1 No.
  • Horn speaker unit - 1 No.
  • Speaker junction box - 1 No.
  • Powder Coated MS Canopy type enclosure - 1 No.
  
  MICROPHONE:
  Type-> Dynamic,NoiseCanceling
  Internal Impedance->300Ω @ 1 KHz Sensitivity -> 56 dB @ 1 KHz relative to 1V/Pa
  
  RECEIVER: Type -> Dynamic
  Internal Impedance -> 300Ω @ 1 Khz
  SPL->108 dB @ 1 Khz
  
  
  LINE AMPLIFIER SECTION:
  Input Sensitivity -> 1 mV to 5mV (adjustable) Input Impedence ->4,7 K (resistive) Load Impedence -> 250Ω, Balanced (Resistive)
  Output-> 2V RMS
  Distortion <1% @ 1 KHz
  Residual Noise Level -50dB
  Frequency Response 200 Hz - 10 KHz, ± 3 dB
  Gong tone Frequency 600 Hz ± 100 Hz
  Gong tone Duration 1.5 Secs (app.)
  
  
  POWER AMPLIFIER SECTION:
  Input Sensitivity 500 mV RMS @1 KHz
  Input Impedence 250Ω (resistive)
  Distortion <1% @ 1 KHz
  Residual Noise Level -60dB
  Frequency Response 200 Hz - 10 KHz, ± 3 dB 
  Output Power 15W RMS @ 1KHz
  Production   Short Circuit & Thermsl Overload.
  
  
  POWER SUPPLY:
  Supply voltage  90-270v AC.
  Power Consumption - 24VA.

• FEATURES:
  
  1. Frequency Response 200Hz - 10KHz
  2.  THD <1% 
  3. Body LM6 Aluminium alloy 
  4. Power Supply 90 - 270V AC 50Hz. 
  5. Page power 6W rms Class-D amplifier.
  6. Alert Tone 
  7. Audio Paging and Talk-back.
  
  Noise canceling type Handset for duplex communication. 
  
  
  Application & Usage: The Wall mounting Handset station is part of the audio paging & talkback communication system employed in process industries for purpose of passing instructions to field operators and for emergency / safety announcements.
  
  Accessories:
  
  • Station junction box - 1 No.
  • Horn speaker unit - 1 No.
  • Speaker junction box - 1 No.
  • Powder Coated MS Canopy type enclosure - 1 No.
  
  MICROPHONE:
  Type-> Dynamic,NoiseCanceling
  Internal Impedance->300Ω @ 1 KHz Sensitivity -> 56 dB @ 1 KHz relative to 1V/Pa
  
  RECEIVER: Type -> Dynamic
  Internal Impedance -> 300Ω @ 1 Khz
  SPL->108 dB @ 1 Khz
  
  
  LINE AMPLIFIER SECTION:
  Input Sensitivity -> 1 mV to 5mV (adjustable) Input Impedence ->4,7 K (resistive) Load Impedence -> 250Ω, Balanced (Resistive)
  Output-> 2V RMS
  Distortion <1% @ 1 KHz
  Residual Noise Level -50dB
  Frequency Response 200 Hz - 10 KHz, ± 3 dB
  Gong tone Frequency 600 Hz ± 100 Hz
  Gong tone Duration 1.5 Secs (app.)
  
  
  POWER AMPLIFIER SECTION:
  Input Sensitivity 500 mV RMS @1 KHz
  Input Impedence 250Ω (resistive)
  Distortion <1% @ 1 KHz
  Residual Noise Level -60dB
  Frequency Response 200 Hz - 10 KHz, ± 3 dB 
  Output Power 15W RMS @ 1KHz
  Production   Short Circuit & Thermsl Overload.
  
  
  POWER SUPPLY:
  Supply voltage  90-270v AC.
  Power Consumption - 24VA.

• FEATURES:
  
  1. Frequency Response 200Hz - 10KHz
  2.  THD <1% 
  3. Body LM6 Aluminium alloy 
  4. Power Supply 90 - 270V AC 50Hz. 
  5. Page power 6W rms Class-D amplifier.
  6. Alert Tone 
  7. Audio Paging and Talk-back.
  
  Noise canceling type Handset for duplex communication. 
  
  
  Application & Usage: The Wall mounting Handset station is part of the audio paging & talkback communication system employed in process industries for purpose of passing instructions to field operators and for emergency / safety announcements.
  
  Accessories:
  
  • Station junction box - 1 No.
  • Horn speaker unit - 1 No.
  • Speaker junction box - 1 No.
  • Powder Coated MS Canopy type enclosure - 1 No.
  
  MICROPHONE:
  Type-> Dynamic,NoiseCanceling
  Internal Impedance->300Ω @ 1 KHz Sensitivity -> 56 dB @ 1 KHz relative to 1V/Pa
  
  RECEIVER: Type -> Dynamic
  Internal Impedance -> 300Ω @ 1 Khz
  SPL->108 dB @ 1 Khz
  
  
  LINE AMPLIFIER SECTION:
  Input Sensitivity -> 1 mV to 5mV (adjustable) Input Impedence ->4,7 K (resistive) Load Impedence -> 250Ω, Balanced (Resistive)
  Output-> 2V RMS
  Distortion <1% @ 1 KHz
  Residual Noise Level -50dB
  Frequency Response 200 Hz - 10 KHz, ± 3 dB
  Gong tone Frequency 600 Hz ± 100 Hz
  Gong tone Duration 1.5 Secs (app.)
  
  
  POWER AMPLIFIER SECTION:
  Input Sensitivity 500 mV RMS @1 KHz
  Input Impedence 250Ω (resistive)
  Distortion <1% @ 1 KHz
  Residual Noise Level -60dB
  Frequency Response 200 Hz - 10 KHz, ± 3 dB 
  Output Power 15W RMS @ 1KHz
  Production   Short Circuit & Thermsl Overload.
  
  
  POWER SUPPLY:
  Supply voltage  90-270v AC.
  Power Consumption - 24VA.

• FEATURES:
  
  1. Frequency Response 200Hz - 10KHz
  2.  THD <1% 
  3. Body LM6 Aluminium alloy 
  4. Power Supply 90 - 270V AC 50Hz. 
  5. Page power 6W rms Class-D amplifier.
  6. Alert Tone 
  7. Audio Paging and Talk-back.
  
  Noise canceling type Handset for duplex communication. 
  
  
  Application & Usage: The Wall mounting Handset station is part of the audio paging & talkback communication system employed in process industries for purpose of passing instructions to field operators and for emergency / safety announcements.
  
  Accessories:
  
  • Station junction box - 1 No.
  • Horn speaker unit - 1 No.
  • Speaker junction box - 1 No.
  • Powder Coated MS Canopy type enclosure - 1 No.
  
  MICROPHONE:
  Type-> Dynamic,NoiseCanceling
  Internal Impedance->300Ω @ 1 KHz Sensitivity -> 56 dB @ 1 KHz relative to 1V/Pa
  
  RECEIVER: Type -> Dynamic
  Internal Impedance -> 300Ω @ 1 Khz
  SPL->108 dB @ 1 Khz
  
  
  LINE AMPLIFIER SECTION:
  Input Sensitivity -> 1 mV to 5mV (adjustable) Input Impedence ->4,7 K (resistive) Load Impedence -> 250Ω, Balanced (Resistive)
  Output-> 2V RMS
  Distortion <1% @ 1 KHz
  Residual Noise Level -50dB
  Frequency Response 200 Hz - 10 KHz, ± 3 dB
  Gong tone Frequency 600 Hz ± 100 Hz
  Gong tone Duration 1.5 Secs (app.)
  
  
  POWER AMPLIFIER SECTION:
  Input Sensitivity 500 mV RMS @1 KHz
  Input Impedence 250Ω (resistive)
  Distortion <1% @ 1 KHz
  Residual Noise Level -60dB
  Frequency Response 200 Hz - 10 KHz, ± 3 dB 
  Output Power 15W RMS @ 1KHz
  Production   Short Circuit & Thermsl Overload.
  
  
  POWER SUPPLY:
  Supply voltage  90-270v AC.
  Power Consumption - 24VA.

• FEATURES:
  
  1. Frequency Response 200Hz - 10KHz
  2.  THD <1% 
  3. Body LM6 Aluminium alloy 
  4. Power Supply 90 - 270V AC 50Hz. 
  5. Page power 6W rms Class-D amplifier.
  6. Alert Tone 
  7. Audio Paging and Talk-back.
  
  Noise canceling type Handset for duplex communication. 
  
  
  Application & Usage: The Wall mounting Handset station is part of the audio paging & talkback communication system employed in process industries for purpose of passing instructions to field operators and for emergency / safety announcements.
  
  Accessories:
  
  • Station junction box - 1 No.
  • Horn speaker unit - 1 No.
  • Speaker junction box - 1 No.
  • Powder Coated MS Canopy type enclosure - 1 No.
  
  MICROPHONE:
  Type-> Dynamic,NoiseCanceling
  Internal Impedance->300Ω @ 1 KHz Sensitivity -> 56 dB @ 1 KHz relative to 1V/Pa
  
  RECEIVER: Type -> Dynamic
  Internal Impedance -> 300Ω @ 1 Khz
  SPL->108 dB @ 1 Khz
  
  
  LINE AMPLIFIER SECTION:
  Input Sensitivity -> 1 mV to 5mV (adjustable) Input Impedence ->4,7 K (resistive) Load Impedence -> 250Ω, Balanced (Resistive)
  Output-> 2V RMS
  Distortion <1% @ 1 KHz
  Residual Noise Level -50dB
  Frequency Response 200 Hz - 10 KHz, ± 3 dB
  Gong tone Frequency 600 Hz ± 100 Hz
  Gong tone Duration 1.5 Secs (app.)
  
  
  POWER AMPLIFIER SECTION:
  Input Sensitivity 500 mV RMS @1 KHz
  Input Impedence 250Ω (resistive)
  Distortion <1% @ 1 KHz
  Residual Noise Level -60dB
  Frequency Response 200 Hz - 10 KHz, ± 3 dB 
  Output Power 15W RMS @ 1KHz
  Production   Short Circuit & Thermsl Overload.
  
  
  POWER SUPPLY:
  Supply voltage  90-270v AC.
  Power Consumption - 24VA.

• FEATURES:
  
  1. Frequency Response 200Hz - 10KHz
  2.  THD <1% 
  3. Body LM6 Aluminium alloy 
  4. Power Supply 90 - 270V AC 50Hz. 
  5. Page power 6W rms Class-D amplifier.
  6. Alert Tone 
  7. Audio Paging and Talk-back.
  
  Noise canceling type Handset for duplex communication. 
  
  
  Application & Usage: The Wall mounting Handset station is part of the audio paging & talkback communication system employed in process industries for purpose of passing instructions to field operators and for emergency / safety announcements.
  
  Accessories:
  
  • Station junction box - 1 No.
  • Horn speaker unit - 1 No.
  • Speaker junction box - 1 No.
  • Powder Coated MS Canopy type enclosure - 1 No.
  
  MICROPHONE:
  Type-> Dynamic,NoiseCanceling
  Internal Impedance->300Ω @ 1 KHz Sensitivity -> 56 dB @ 1 KHz relative to 1V/Pa
  
  RECEIVER: Type -> Dynamic
  Internal Impedance -> 300Ω @ 1 Khz
  SPL->108 dB @ 1 Khz
  
  
  LINE AMPLIFIER SECTION:
  Input Sensitivity -> 1 mV to 5mV (adjustable) Input Impedence ->4,7 K (resistive) Load Impedence -> 250Ω, Balanced (Resistive)
  Output-> 2V RMS
  Distortion <1% @ 1 KHz
  Residual Noise Level -50dB
  Frequency Response 200 Hz - 10 KHz, ± 3 dB
  Gong tone Frequency 600 Hz ± 100 Hz
  Gong tone Duration 1.5 Secs (app.)
  
  
  POWER AMPLIFIER SECTION:
  Input Sensitivity 500 mV RMS @1 KHz
  Input Impedence 250Ω (resistive)
  Distortion <1% @ 1 KHz
  Residual Noise Level -60dB
  Frequency Response 200 Hz - 10 KHz, ± 3 dB 
  Output Power 15W RMS @ 1KHz
  Production   Short Circuit & Thermsl Overload.
  
  
  POWER SUPPLY:
  Supply voltage  90-270v AC.
  Power Consumption - 24VA.

• FEATURES:
  
  1. Frequency Response 200Hz - 10KHz
  2.  THD <1% 
  3. Body LM6 Aluminium alloy 
  4. Power Supply 90 - 270V AC 50Hz. 
  5. Page power 6W rms Class-D amplifier.
  6. Alert Tone 
  7. Audio Paging and Talk-back.
  
  Noise canceling type Handset for duplex communication. 
  
  
  Application & Usage: The Wall mounting Handset station is part of the audio paging & talkback communication system employed in process industries for purpose of passing instructions to field operators and for emergency / safety announcements.
  
  Accessories:
  
  • Station junction box - 1 No.
  • Horn speaker unit - 1 No.
  • Speaker junction box - 1 No.
  • Powder Coated MS Canopy type enclosure - 1 No.
  
  MICROPHONE:
  Type-> Dynamic,NoiseCanceling
  Internal Impedance->300Ω @ 1 KHz Sensitivity -> 56 dB @ 1 KHz relative to 1V/Pa
  
  RECEIVER: Type -> Dynamic
  Internal Impedance -> 300Ω @ 1 Khz
  SPL->108 dB @ 1 Khz
  
  
  LINE AMPLIFIER SECTION:
  Input Sensitivity -> 1 mV to 5mV (adjustable) Input Impedence ->4,7 K (resistive) Load Impedence -> 250Ω, Balanced (Resistive)
  Output-> 2V RMS
  Distortion <1% @ 1 KHz
  Residual Noise Level -50dB
  Frequency Response 200 Hz - 10 KHz, ± 3 dB
  Gong tone Frequency 600 Hz ± 100 Hz
  Gong tone Duration 1.5 Secs (app.)
  
  
  POWER AMPLIFIER SECTION:
  Input Sensitivity 500 mV RMS @1 KHz
  Input Impedence 250Ω (resistive)
  Distortion <1% @ 1 KHz
  Residual Noise Level -60dB
  Frequency Response 200 Hz - 10 KHz, ± 3 dB 
  Output Power 15W RMS @ 1KHz
  Production   Short Circuit & Thermsl Overload.
  
  
  POWER SUPPLY:
  Supply voltage  90-270v AC.
  Power Consumption - 24VA.

• FEATURES:
  
  1. Frequency Response 200Hz - 10KHz
  2.  THD <1% 
  3. Body LM6 Aluminium alloy 
  4. Power Supply 90 - 270V AC 50Hz. 
  5. Page power 6W rms Class-D amplifier.
  6. Alert Tone 
  7. Audio Paging and Talk-back.
  
  Noise canceling type Handset for duplex communication. 
  
  
  Application & Usage: The Wall mounting Handset station is part of the audio paging & talkback communication system employed in process industries for purpose of passing instructions to field operators and for emergency / safety announcements.
  
  Accessories:
  
  • Station junction box - 1 No.
  • Horn speaker unit - 1 No.
  • Speaker junction box - 1 No.
  • Powder Coated MS Canopy type enclosure - 1 No.
  
  MICROPHONE:
  Type-> Dynamic,NoiseCanceling
  Internal Impedance->300Ω @ 1 KHz Sensitivity -> 56 dB @ 1 KHz relative to 1V/Pa
  
  RECEIVER: Type -> Dynamic
  Internal Impedance -> 300Ω @ 1 Khz
  SPL->108 dB @ 1 Khz
  
  
  LINE AMPLIFIER SECTION:
  Input Sensitivity -> 1 mV to 5mV (adjustable) Input Impedence ->4,7 K (resistive) Load Impedence -> 250Ω, Balanced (Resistive)
  Output-> 2V RMS
  Distortion <1% @ 1 KHz
  Residual Noise Level -50dB
  Frequency Response 200 Hz - 10 KHz, ± 3 dB
  Gong tone Frequency 600 Hz ± 100 Hz
  Gong tone Duration 1.5 Secs (app.)
  
  
  POWER AMPLIFIER SECTION:
  Input Sensitivity 500 mV RMS @1 KHz
  Input Impedence 250Ω (resistive)
  Distortion <1% @ 1 KHz
  Residual Noise Level -60dB
  Frequency Response 200 Hz - 10 KHz, ± 3 dB 
  Output Power 15W RMS @ 1KHz
  Production   Short Circuit & Thermsl Overload.
  
  
  POWER SUPPLY:
  Supply voltage  90-270v AC.
  Power Consumption - 24VA.

• FEATURES:
  
  1. Frequency Response 200Hz - 10KHz
  2.  THD <1% 
  3. Body LM6 Aluminium alloy 
  4. Power Supply 90 - 270V AC 50Hz. 
  5. Page power 6W rms Class-D amplifier.
  6. Alert Tone 
  7. Audio Paging and Talk-back.
  
  Noise canceling type Handset for duplex communication. 
  
  
  Application & Usage: The Wall mounting Handset station is part of the audio paging & talkback communication system employed in process industries for purpose of passing instructions to field operators and for emergency / safety announcements.
  
  Accessories:
  
  • Station junction box - 1 No.
  • Horn speaker unit - 1 No.
  • Speaker junction box - 1 No.
  • Powder Coated MS Canopy type enclosure - 1 No.
  
  MICROPHONE:
  Type-> Dynamic,NoiseCanceling
  Internal Impedance->300Ω @ 1 KHz Sensitivity -> 56 dB @ 1 KHz relative to 1V/Pa
  
  RECEIVER: Type -> Dynamic
  Internal Impedance -> 300Ω @ 1 Khz
  SPL->108 dB @ 1 Khz
  
  
  LINE AMPLIFIER SECTION:
  Input Sensitivity -> 1 mV to 5mV (adjustable) Input Impedence ->4,7 K (resistive) Load Impedence -> 250Ω, Balanced (Resistive)
  Output-> 2V RMS
  Distortion <1% @ 1 KHz
  Residual Noise Level -50dB
  Frequency Response 200 Hz - 10 KHz, ± 3 dB
  Gong tone Frequency 600 Hz ± 100 Hz
  Gong tone Duration 1.5 Secs (app.)
  
  
  POWER AMPLIFIER SECTION:
  Input Sensitivity 500 mV RMS @1 KHz
  Input Impedence 250Ω (resistive)
  Distortion <1% @ 1 KHz
  Residual Noise Level -60dB
  Frequency Response 200 Hz - 10 KHz, ± 3 dB 
  Output Power 15W RMS @ 1KHz
  Production   Short Circuit & Thermsl Overload.
  
  
  POWER SUPPLY:
  Supply voltage  90-270v AC.
  Power Consumption - 24VA.

• FEATURES:
  
  1. Frequency Response 200Hz - 10KHz
  2.  THD <1% 
  3. Body LM6 Aluminium alloy 
  4. Power Supply 90 - 270V AC 50Hz. 
  5. Page power 6W rms Class-D amplifier.
  6. Alert Tone 
  7. Audio Paging and Talk-back.
  
  Noise canceling type Handset for duplex communication. 
  
  
  Application & Usage: The Wall mounting Handset station is part of the audio paging & talkback communication system employed in process industries for purpose of passing instructions to field operators and for emergency / safety announcements.
  
  Accessories:
  
  • Station junction box - 1 No.
  • Horn speaker unit - 1 No.
  • Speaker junction box - 1 No.
  • Powder Coated MS Canopy type enclosure - 1 No.
  
  MICROPHONE:
  Type-> Dynamic,NoiseCanceling
  Internal Impedance->300Ω @ 1 KHz Sensitivity -> 56 dB @ 1 KHz relative to 1V/Pa
  
  RECEIVER: Type -> Dynamic
  Internal Impedance -> 300Ω @ 1 Khz
  SPL->108 dB @ 1 Khz
  
  
  LINE AMPLIFIER SECTION:
  Input Sensitivity -> 1 mV to 5mV (adjustable) Input Impedence ->4,7 K (resistive) Load Impedence -> 250Ω, Balanced (Resistive)
  Output-> 2V RMS
  Distortion <1% @ 1 KHz
  Residual Noise Level -50dB
  Frequency Response 200 Hz - 10 KHz, ± 3 dB
  Gong tone Frequency 600 Hz ± 100 Hz
  Gong tone Duration 1.5 Secs (app.)
  
  
  POWER AMPLIFIER SECTION:
  Input Sensitivity 500 mV RMS @1 KHz
  Input Impedence 250Ω (resistive)
  Distortion <1% @ 1 KHz
  Residual Noise Level -60dB
  Frequency Response 200 Hz - 10 KHz, ± 3 dB 
  Output Power 15W RMS @ 1KHz
  Production   Short Circuit & Thermsl Overload.
  
  
  POWER SUPPLY:
  Supply voltage  90-270v AC.
  Power Consumption - 24VA.

• FEATURES:
  
  1. Frequency Response 200Hz - 10KHz
  2.  THD <1% 
  3. Body LM6 Aluminium alloy 
  4. Power Supply 90 - 270V AC 50Hz. 
  5. Page power 6W rms Class-D amplifier.
  6. Alert Tone 
  7. Audio Paging and Talk-back.
  
  Noise canceling type Handset for duplex communication. 
  
  
  Application & Usage: The Wall mounting Handset station is part of the audio paging & talkback communication system employed in process industries for purpose of passing instructions to field operators and for emergency / safety announcements.
  
  Accessories:
  
  • Station junction box - 1 No.
  • Horn speaker unit - 1 No.
  • Speaker junction box - 1 No.
  • Powder Coated MS Canopy type enclosure - 1 No.
  
  MICROPHONE:
  Type-> Dynamic,NoiseCanceling
  Internal Impedance->300Ω @ 1 KHz Sensitivity -> 56 dB @ 1 KHz relative to 1V/Pa
  
  RECEIVER: Type -> Dynamic
  Internal Impedance -> 300Ω @ 1 Khz
  SPL->108 dB @ 1 Khz
  
  
  LINE AMPLIFIER SECTION:
  Input Sensitivity -> 1 mV to 5mV (adjustable) Input Impedence ->4,7 K (resistive) Load Impedence -> 250Ω, Balanced (Resistive)
  Output-> 2V RMS
  Distortion <1% @ 1 KHz
  Residual Noise Level -50dB
  Frequency Response 200 Hz - 10 KHz, ± 3 dB
  Gong tone Frequency 600 Hz ± 100 Hz
  Gong tone Duration 1.5 Secs (app.)
  
  
  POWER AMPLIFIER SECTION:
  Input Sensitivity 500 mV RMS @1 KHz
  Input Impedence 250Ω (resistive)
  Distortion <1% @ 1 KHz
  Residual Noise Level -60dB
  Frequency Response 200 Hz - 10 KHz, ± 3 dB 
  Output Power 15W RMS @ 1KHz
  Production   Short Circuit & Thermsl Overload.
  
  
  POWER SUPPLY:
  Supply voltage  90-270v AC.
  Power Consumption - 24VA.

• FEATURES:
  
  1. Frequency Response 200Hz - 10KHz
  2.  THD <1% 
  3. Body LM6 Aluminium alloy 
  4. Power Supply 90 - 270V AC 50Hz. 
  5. Page power 6W rms Class-D amplifier.
  6. Alert Tone 
  7. Audio Paging and Talk-back.
  
  Noise canceling type Handset for duplex communication. 
  
  
  Application & Usage: The Wall mounting Handset station is part of the audio paging & talkback communication system employed in process industries for purpose of passing instructions to field operators and for emergency / safety announcements.
  
  Accessories:
  
  • Station junction box - 1 No.
  • Horn speaker unit - 1 No.
  • Speaker junction box - 1 No.
  • Powder Coated MS Canopy type enclosure - 1 No.
  
  MICROPHONE:
  Type-> Dynamic,NoiseCanceling
  Internal Impedance->300Ω @ 1 KHz Sensitivity -> 56 dB @ 1 KHz relative to 1V/Pa
  
  RECEIVER: Type -> Dynamic
  Internal Impedance -> 300Ω @ 1 Khz
  SPL->108 dB @ 1 Khz
  
  
  LINE AMPLIFIER SECTION:
  Input Sensitivity -> 1 mV to 5mV (adjustable) Input Impedence ->4,7 K (resistive) Load Impedence -> 250Ω, Balanced (Resistive)
  Output-> 2V RMS
  Distortion <1% @ 1 KHz
  Residual Noise Level -50dB
  Frequency Response 200 Hz - 10 KHz, ± 3 dB
  Gong tone Frequency 600 Hz ± 100 Hz
  Gong tone Duration 1.5 Secs (app.)
  
  
  POWER AMPLIFIER SECTION:
  Input Sensitivity 500 mV RMS @1 KHz
  Input Impedence 250Ω (resistive)
  Distortion <1% @ 1 KHz
  Residual Noise Level -60dB
  Frequency Response 200 Hz - 10 KHz, ± 3 dB 
  Output Power 15W RMS @ 1KHz
  Production   Short Circuit & Thermsl Overload.
  
  
  POWER SUPPLY:
  Supply voltage  90-270v AC.
  Power Consumption - 24VA.

• FEATURES:
  
  1. Frequency Response 200Hz - 10KHz
  2.  THD <1% 
  3. Body LM6 Aluminium alloy 
  4. Power Supply 90 - 270V AC 50Hz. 
  5. Page power 6W rms Class-D amplifier.
  6. Alert Tone 
  7. Audio Paging and Talk-back.
  
  Noise canceling type Handset for duplex communication. 
  
  
  Application & Usage: The Wall mounting Handset station is part of the audio paging & talkback communication system employed in process industries for purpose of passing instructions to field operators and for emergency / safety announcements.
  
  Accessories:
  
  • Station junction box - 1 No.
  • Horn speaker unit - 1 No.
  • Speaker junction box - 1 No.
  • Powder Coated MS Canopy type enclosure - 1 No.
  
  MICROPHONE:
  Type-> Dynamic,NoiseCanceling
  Internal Impedance->300Ω @ 1 KHz Sensitivity -> 56 dB @ 1 KHz relative to 1V/Pa
  
  RECEIVER: Type -> Dynamic
  Internal Impedance -> 300Ω @ 1 Khz
  SPL->108 dB @ 1 Khz
  
  
  LINE AMPLIFIER SECTION:
  Input Sensitivity -> 1 mV to 5mV (adjustable) Input Impedence ->4,7 K (resistive) Load Impedence -> 250Ω, Balanced (Resistive)
  Output-> 2V RMS
  Distortion <1% @ 1 KHz
  Residual Noise Level -50dB
  Frequency Response 200 Hz - 10 KHz, ± 3 dB
  Gong tone Frequency 600 Hz ± 100 Hz
  Gong tone Duration 1.5 Secs (app.)
  
  
  POWER AMPLIFIER SECTION:
  Input Sensitivity 500 mV RMS @1 KHz
  Input Impedence 250Ω (resistive)
  Distortion <1% @ 1 KHz
  Residual Noise Level -60dB
  Frequency Response 200 Hz - 10 KHz, ± 3 dB 
  Output Power 15W RMS @ 1KHz
  Production   Short Circuit & Thermsl Overload.
  
  
  POWER SUPPLY:
  Supply voltage  90-270v AC.
  Power Consumption - 24VA.

• FEATURES:
  
  1. Frequency Response 200Hz - 10KHz
  2.  THD <1% 
  3. Body LM6 Aluminium alloy 
  4. Power Supply 90 - 270V AC 50Hz. 
  5. Page power 6W rms Class-D amplifier.
  6. Alert Tone 
  7. Audio Paging and Talk-back.
  
  Noise canceling type Handset for duplex communication. 
  
  
  Application & Usage: The Wall mounting Handset station is part of the audio paging & talkback communication system employed in process industries for purpose of passing instructions to field operators and for emergency / safety announcements.
  
  Accessories:
  
  • Station junction box - 1 No.
  • Horn speaker unit - 1 No.
  • Speaker junction box - 1 No.
  • Powder Coated MS Canopy type enclosure - 1 No.
  
  MICROPHONE:
  Type-> Dynamic,NoiseCanceling
  Internal Impedance->300Ω @ 1 KHz Sensitivity -> 56 dB @ 1 KHz relative to 1V/Pa
  
  RECEIVER: Type -> Dynamic
  Internal Impedance -> 300Ω @ 1 Khz
  SPL->108 dB @ 1 Khz
  
  
  LINE AMPLIFIER SECTION:
  Input Sensitivity -> 1 mV to 5mV (adjustable) Input Impedence ->4,7 K (resistive) Load Impedence -> 250Ω, Balanced (Resistive)
  Output-> 2V RMS
  Distortion <1% @ 1 KHz
  Residual Noise Level -50dB
  Frequency Response 200 Hz - 10 KHz, ± 3 dB
  Gong tone Frequency 600 Hz ± 100 Hz
  Gong tone Duration 1.5 Secs (app.)
  
  
  POWER AMPLIFIER SECTION:
  Input Sensitivity 500 mV RMS @1 KHz
  Input Impedence 250Ω (resistive)
  Distortion <1% @ 1 KHz
  Residual Noise Level -60dB
  Frequency Response 200 Hz - 10 KHz, ± 3 dB 
  Output Power 15W RMS @ 1KHz
  Production   Short Circuit & Thermsl Overload.
  
  
  POWER SUPPLY:
  Supply voltage  90-270v AC.
  Power Consumption - 24VA.

• FEATURES:
  
  1. Frequency Response 200Hz - 10KHz
  2.  THD <1% 
  3. Body LM6 Aluminium alloy 
  4. Power Supply 90 - 270V AC 50Hz. 
  5. Page power 6W rms Class-D amplifier.
  6. Alert Tone 
  7. Audio Paging and Talk-back.
  
  Noise canceling type Handset for duplex communication. 
  
  
  Application & Usage: The Wall mounting Handset station is part of the audio paging & talkback communication system employed in process industries for purpose of passing instructions to field operators and for emergency / safety announcements.
  
  Accessories:
  
  • Station junction box - 1 No.
  • Horn speaker unit - 1 No.
  • Speaker junction box - 1 No.
  • Powder Coated MS Canopy type enclosure - 1 No.
  
  MICROPHONE:
  Type-> Dynamic,NoiseCanceling
  Internal Impedance->300Ω @ 1 KHz Sensitivity -> 56 dB @ 1 KHz relative to 1V/Pa
  
  RECEIVER: Type -> Dynamic
  Internal Impedance -> 300Ω @ 1 Khz
  SPL->108 dB @ 1 Khz
  
  
  LINE AMPLIFIER SECTION:
  Input Sensitivity -> 1 mV to 5mV (adjustable) Input Impedence ->4,7 K (resistive) Load Impedence -> 250Ω, Balanced (Resistive)
  Output-> 2V RMS
  Distortion <1% @ 1 KHz
  Residual Noise Level -50dB
  Frequency Response 200 Hz - 10 KHz, ± 3 dB
  Gong tone Frequency 600 Hz ± 100 Hz
  Gong tone Duration 1.5 Secs (app.)
  
  
  POWER AMPLIFIER SECTION:
  Input Sensitivity 500 mV RMS @1 KHz
  Input Impedence 250Ω (resistive)
  Distortion <1% @ 1 KHz
  Residual Noise Level -60dB
  Frequency Response 200 Hz - 10 KHz, ± 3 dB 
  Output Power 15W RMS @ 1KHz
  Production   Short Circuit & Thermsl Overload.
  
  
  POWER SUPPLY:
  Supply voltage  90-270v AC.
  Power Consumption - 24VA.

• FEATURES:
  
  1. Frequency Response 200Hz - 10KHz
  2.  THD <1% 
  3. Body LM6 Aluminium alloy 
  4. Power Supply 90 - 270V AC 50Hz. 
  5. Page power 6W rms Class-D amplifier.
  6. Alert Tone 
  7. Audio Paging and Talk-back.
  
  Noise canceling type Handset for duplex communication. 
  
  
  Application & Usage: The Wall mounting Handset station is part of the audio paging & talkback communication system employed in process industries for purpose of passing instructions to field operators and for emergency / safety announcements.
  
  Accessories:
  
  • Station junction box - 1 No.
  • Horn speaker unit - 1 No.
  • Speaker junction box - 1 No.
  • Powder Coated MS Canopy type enclosure - 1 No.
  
  MICROPHONE:
  Type-> Dynamic,NoiseCanceling
  Internal Impedance->300Ω @ 1 KHz Sensitivity -> 56 dB @ 1 KHz relative to 1V/Pa
  
  RECEIVER: Type -> Dynamic
  Internal Impedance -> 300Ω @ 1 Khz
  SPL->108 dB @ 1 Khz
  
  
  LINE AMPLIFIER SECTION:
  Input Sensitivity -> 1 mV to 5mV (adjustable) Input Impedence ->4,7 K (resistive) Load Impedence -> 250Ω, Balanced (Resistive)
  Output-> 2V RMS
  Distortion <1% @ 1 KHz
  Residual Noise Level -50dB
  Frequency Response 200 Hz - 10 KHz, ± 3 dB
  Gong tone Frequency 600 Hz ± 100 Hz
  Gong tone Duration 1.5 Secs (app.)
  
  
  POWER AMPLIFIER SECTION:
  Input Sensitivity 500 mV RMS @1 KHz
  Input Impedence 250Ω (resistive)
  Distortion <1% @ 1 KHz
  Residual Noise Level -60dB
  Frequency Response 200 Hz - 10 KHz, ± 3 dB 
  Output Power 15W RMS @ 1KHz
  Production   Short Circuit & Thermsl Overload.
  
  
  POWER SUPPLY:
  Supply voltage  90-270v AC.
  Power Consumption - 24VA.

• FEATURES:
  
  1. Frequency Response 200Hz - 10KHz
  2.  THD <1% 
  3. Body LM6 Aluminium alloy 
  4. Power Supply 90 - 270V AC 50Hz. 
  5. Page power 6W rms Class-D amplifier.
  6. Alert Tone 
  7. Audio Paging and Talk-back.
  
  Noise canceling type Handset for duplex communication. 
  
  
  Application & Usage: The Wall mounting Handset station is part of the audio paging & talkback communication system employed in process industries for purpose of passing instructions to field operators and for emergency / safety announcements.
  
  Accessories:
  
  • Station junction box - 1 No.
  • Horn speaker unit - 1 No.
  • Speaker junction box - 1 No.
  • Powder Coated MS Canopy type enclosure - 1 No.
  
  MICROPHONE:
  Type-> Dynamic,NoiseCanceling
  Internal Impedance->300Ω @ 1 KHz Sensitivity -> 56 dB @ 1 KHz relative to 1V/Pa
  
  RECEIVER: Type -> Dynamic
  Internal Impedance -> 300Ω @ 1 Khz
  SPL->108 dB @ 1 Khz
  
  
  LINE AMPLIFIER SECTION:
  Input Sensitivity -> 1 mV to 5mV (adjustable) Input Impedence ->4,7 K (resistive) Load Impedence -> 250Ω, Balanced (Resistive)
  Output-> 2V RMS
  Distortion <1% @ 1 KHz
  Residual Noise Level -50dB
  Frequency Response 200 Hz - 10 KHz, ± 3 dB
  Gong tone Frequency 600 Hz ± 100 Hz
  Gong tone Duration 1.5 Secs (app.)
  
  
  POWER AMPLIFIER SECTION:
  Input Sensitivity 500 mV RMS @1 KHz
  Input Impedence 250Ω (resistive)
  Distortion <1% @ 1 KHz
  Residual Noise Level -60dB
  Frequency Response 200 Hz - 10 KHz, ± 3 dB 
  Output Power 15W RMS @ 1KHz
  Production   Short Circuit & Thermsl Overload.
  
  
  POWER SUPPLY:
  Supply voltage  90-270v AC.
  Power Consumption - 24VA.

• FEATURES:
  
  1. Frequency Response 200Hz - 10KHz
  2.  THD <1% 
  3. Body LM6 Aluminium alloy 
  4. Power Supply 90 - 270V AC 50Hz. 
  5. Page power 6W rms Class-D amplifier.
  6. Alert Tone 
  7. Audio Paging and Talk-back.
  
  Noise canceling type Handset for duplex communication. 
  
  
  Application & Usage: The Wall mounting Handset station is part of the audio paging & talkback communication system employed in process industries for purpose of passing instructions to field operators and for emergency / safety announcements.
  
  Accessories:
  
  • Station junction box - 1 No.
  • Horn speaker unit - 1 No.
  • Speaker junction box - 1 No.
  • Powder Coated MS Canopy type enclosure - 1 No.
  
  MICROPHONE:
  Type-> Dynamic,NoiseCanceling
  Internal Impedance->300Ω @ 1 KHz Sensitivity -> 56 dB @ 1 KHz relative to 1V/Pa
  
  RECEIVER: Type -> Dynamic
  Internal Impedance -> 300Ω @ 1 Khz
  SPL->108 dB @ 1 Khz
  
  
  LINE AMPLIFIER SECTION:
  Input Sensitivity -> 1 mV to 5mV (adjustable) Input Impedence ->4,7 K (resistive) Load Impedence -> 250Ω, Balanced (Resistive)
  Output-> 2V RMS
  Distortion <1% @ 1 KHz
  Residual Noise Level -50dB
  Frequency Response 200 Hz - 10 KHz, ± 3 dB
  Gong tone Frequency 600 Hz ± 100 Hz
  Gong tone Duration 1.5 Secs (app.)
  
  
  POWER AMPLIFIER SECTION:
  Input Sensitivity 500 mV RMS @1 KHz
  Input Impedence 250Ω (resistive)
  Distortion <1% @ 1 KHz
  Residual Noise Level -60dB
  Frequency Response 200 Hz - 10 KHz, ± 3 dB 
  Output Power 15W RMS @ 1KHz
  Production   Short Circuit & Thermsl Overload.
  
  
  POWER SUPPLY:
  Supply voltage  90-270v AC.
  Power Consumption - 24VA.

Product Description: EITU 9000 IP-WIndustrial IP Two-Way Wireless Talk Back System
The EITU 9000 IP-W is a robust and advanced industrial-grade wireless talk back system designed for reliable communication in challenging environments. Built with LM6 aluminium alloy for durability and weatherproof protection up to IP67, it ensures clear, uninterrupted communication even in noisy and harsh conditions.
This system supports standard SIP protocol and is configured via a web-based interface, providing duplex communication and a built-in 30W amplifier for loud and clear audio. It is suitable for point-to-point, group, and all-call communications, making it ideal for industries requiring efficient coordination and safety communication.
Key Features
Standard SIP Phone
Latest Technology with Web-based Configuration
Built-in 30W Amplifier for Clear Audio
LM6 Aluminium Alloy Body for Durability and to withstand corrosive atmosphere.
Duplex Communication for Seamless Interaction
Point-to-Point & Paging Communication (Private, Group, & All Call)
Noise Cancelling Handset with Spiral Cord
Weatherproof Protection: IP67 Rated
Cost-effective: Reduced cabling & easier maintenance
Simplified Wall/Structure Mounting Installation

Technical Specifications
Input Power: 90 – 270VAC
Page Output Power: 30W
Power Consumption: 35VA
Networking: IPv4, TCP, UDP
Protocol: SIP over UDS
Network Features: IP Allocation via DHCP (WAN/Static)
VoIP Multicast: One-to-Many Communication
Finish: Light Grey, Shade RAL 7035
Cable Entry: 19mm Dia, 3 Nos Cable Glands
Weight: 6.5 kg
Dimensions (H x W x D): 440 x 200 x 180 mm

Optional Accessories
1. Dust Protection Cover ( MS Canopy)

2. Flashing Beacon

Product Description: EITU 9000 IP-WIndustrial IP Two-Way Wireless Talk Back System
The EITU 9000 IP-W is a robust and advanced industrial-grade wireless talk back system designed for reliable communication in challenging environments. Built with LM6 aluminium alloy for durability and weatherproof protection up to IP67, it ensures clear, uninterrupted communication even in noisy and harsh conditions.
This system supports standard SIP protocol and is configured via a web-based interface, providing duplex communication and a built-in 30W amplifier for loud and clear audio. It is suitable for point-to-point, group, and all-call communications, making it ideal for industries requiring efficient coordination and safety communication.
Key Features
Standard SIP Phone
Latest Technology with Web-based Configuration
Built-in 30W Amplifier for Clear Audio
LM6 Aluminium Alloy Body for Durability and to withstand corrosive atmosphere.
Duplex Communication for Seamless Interaction
Point-to-Point & Paging Communication (Private, Group, & All Call)
Noise Cancelling Handset with Spiral Cord
Weatherproof Protection: IP67 Rated
Cost-effective: Reduced cabling & easier maintenance
Simplified Wall/Structure Mounting Installation

Technical Specifications
Input Power: 90 – 270VAC
Page Output Power: 30W
Power Consumption: 35VA
Networking: IPv4, TCP, UDP
Protocol: SIP over UDS
Network Features: IP Allocation via DHCP (WAN/Static)
VoIP Multicast: One-to-Many Communication
Finish: Light Grey, Shade RAL 7035
Cable Entry: 19mm Dia, 3 Nos Cable Glands
Weight: 6.5 kg
Dimensions (H x W x D): 440 x 200 x 180 mm

Optional Accessories
1. Dust Protection Cover ( MS Canopy)

2. Flashing Beacon

Industrial IP PBX (Internet Protocol Private Branch Exchange) communication.
Here's a breakdown of the components:
IP PBX: The main communication device used for managing internal and external calls in an organization. This device, in the image, is a reputed make IP PBX. It connects to both the internal phone network and external lines, handling the switching of calls and managing extensions, call routing, and voicemail.

8-Port Switch: This is a reputed make 8-port gigabit switch which connects multiple IP phones to the network. It expands the number of devices that can communicate within the office and allows them to connect to the IP PBX system.

IP Telephones: These are reputed make IP phones that connect to the IP PBX system over a local area network (LAN). Each phone has a specific extension and allows users to make and receive VoIP (Voice over IP) calls, enabling efficient internal and external communication.

Industrial IP Phone: ELIXIR make Industrial Grade IP Phone Model EITU 9000 IP is an IP Phone for use in Industries.

Features: Industrial Standard SIP phone.
Weatherproof protection to IP67.
Metal Keypad Built-in amplifier - 30 watts.
Audio amplifier Class D type Wall mounting Simple installation.
Dust protection Cover (MS Canopy).

TECHNICAL SPECIFICATION: Power input : 90 - 270V AC 50Hz
Port : WAN / LAN : 10/100 Base - Rj45
Voice features : Support SIP.
Echo cancellation. Support full duplex.
DTMF : SIP info.

Network Features : Support WAN/LAN.
Support Web Configuration Casing Material :Die cast LM6 aluminium alloy, Powder coated Handset - Noise cancelling type, ensures clear communication even from a highly noisy area like an engine room Material : ABS plastic with spiral cord.
Temperature: Operating : -40ºC to +85ºC Storing : -45ºC to +85ºC.
Weight: approx. 6.5Kg.
Optional Accerssories: •Beacon Lamp •Hooter

This setup is ideal for industrial plant communication, where a business can connect several IP phones for managing multiple lines and ensuring smooth call handling across the organization.

Industrial IP PBX (Internet Protocol Private Branch Exchange) communication. Here's a breakdown of the components:
IP PBX: The main communication device used for managing internal and external calls in an organization. This device, in the image, is a reputed make IP PBX. It connects to both the internal phone network and external lines, handling the switching of calls and managing extensions, call routing, and voicemail.

8-Port Switch: This is a reputed make 8-port gigabit switch which connects multiple IP phones to the network. It expands the number of devices that can communicate within the office and allows them to connect to the IP PBX system.

IP Telephones: These are reputed make IP phones that connect to the IP PBX system over a local area network (LAN). Each phone has a specific extension and allows users to make and receive VoIP (Voice over IP) calls, enabling efficient internal and external communication.

Industrial IP Phone: ELIXIR make Industrial Grade IP Phone Model EITU 9000 IP is an IP Phone for use in Industries.

Features: Industrial Standard SIP phone.
Weatherproof protection to IP67.
Metal Keypad Built-in amplifier - 30 watts.
Audio amplifier Class D type Wall mounting Simple installation.
Dust protection Cover (MS Canopy).

TECHNICAL SPECIFICATION: Power input : 90 - 270V AC 50Hz
Port : WAN / LAN : 10/100 Base - Rj45
Voice features : Support SIP.
Echo cancellation. Support full duplex.
DTMF : SIP info.

Network Features : Support WAN/LAN. Support Web Configuration Casing Material :Die cast LM6 aluminium alloy, Powder coated Handset - Noise cancelling type, ensures clear communication even from a highly noisy area like an engine room Material : ABS plastic with spiral cord.

Temperature: Operating : -40ºC to +85ºC Storing : -45ºC to +85ºC.

Weight: approx. 6.5Kg.
Optional Accerssories: •Beacon Lamp •Hooter

This setup is ideal for industrial plant communication, where a business can connect several IP phones for managing multiple lines and ensuring smooth call handling across the organization.

The Gray WiFi Connectivity Wireless Phone combines sleek design with advanced wireless technology for smooth, uninterrupted communication. Built with WiFi support, it allows you to make calls, stream, and stay connected without relying on traditional wired connections.

• Standard SIP phone.
• Weatherproof protection to IP67.
• Metal Keypad Built-in amplifier - 30 watts. 
• Wall mounting, simple installation.
• Dust protection Cover (Canopy).

TECHNICAL SPECIFICATION:

• Power input : 90 - 270V AC 50Hz
• Port : WAN / LAN : 10/100Base - Rj45

Voice features : Support SIP.
                        Echo cancellation.
                        Support full duplex.
                        DTMF : SIP info.

Network Features :

1. Support WAN/LAN.
2. Support Web Configuration

• Casing Material :Die cast LM6 aluminium alloy, Powder coated
•  Handset - Noise cancelling type, ensures clear communication even from a highly noisy area like an engine room Material : ABS plastic with spiral cord.
•  Temperature: Operating : -40ºC to +85ºC Storing : -45ºC to +85ºC.
• weight: approx. 6.5Kg.                                       

 Optional Accerssories:

• Beacon Lamp
• Hooter               

• Standard SIP phone.
• Weatherproof protection to IP67.
• Metal Keypad Built-in amplifier - 30 watts. 
• Wall mounting, simple installation.
• Dust protection Cover (Canopy).

TECHNICAL SPECIFICATION:

• Power input : 90 - 270V AC 50Hz
• Port : WAN / LAN : 10/100Base - Rj45

Voice features : Support SIP.
                        Echo cancellation.
                        Support full duplex.
                        DTMF : SIP info.

Network Features :

1. Support WAN/LAN.
2. Support Web Configuration

• Casing Material :Die cast LM6 aluminium alloy, Powder coated
•  Handset - Noise cancelling type, ensures clear communication even from a highly noisy area like an engine room Material : ABS plastic with spiral cord.
•  Temperature: Operating : -40ºC to +85ºC Storing : -45ºC to +85ºC.
• weight: approx. 6.5Kg.                                       

 Optional Accerssories:

• Beacon Lamp
• Hooter               

• Standard SIP phone.
• Weatherproof protection to IP67.
• Metal Keypad Built-in amplifier - 30 watts. 
• Wall mounting, simple installation.
• Dust protection Cover (Canopy).

TECHNICAL SPECIFICATION:

• Power input : 90 - 270V AC 50Hz
• Port : WAN / LAN : 10/100Base - Rj45

Voice features : Support SIP.
                        Echo cancellation.
                        Support full duplex.
                        DTMF : SIP info.

Network Features :

1. Support WAN/LAN.
2. Support Web Configuration

• Casing Material :Die cast LM6 aluminium alloy, Powder coated
•  Handset - Noise cancelling type, ensures clear communication even from a highly noisy area like an engine room Material : ABS plastic with spiral cord.
•  Temperature: Operating : -40ºC to +85ºC Storing : -45ºC to +85ºC.
• weight: approx. 6.5Kg.                                       

 Optional Accerssories:

• Beacon Lamp
• Hooter               

• FEATURES:
  
  1. Frequency Response 200Hz - 10KHz
  2.  THD <1% 
  3. Body LM6 Aluminium alloy 
  4. Power Supply 90 - 270V AC 50Hz. 
  5. Page power 6W rms Class-D amplifier.
  6. Alert Tone 
  7. Audio Paging and Talk-back.
  
  Noise canceling type Handset for duplex communication. 
  
  
  Application & Usage: The Wall mounting Handset station is part of the audio paging & talkback communication system employed in process industries for purpose of passing instructions to field operators and for emergency / safety announcements.
  
  Accessories:
  
  • Station junction box - 1 No.
  • Horn speaker unit - 1 No.
  • Speaker junction box - 1 No.
  • Powder Coated MS Canopy type enclosure - 1 No.
  
  MICROPHONE:
  Type-> Dynamic,NoiseCanceling
  Internal Impedance->300Ω @ 1 KHz Sensitivity -> 56 dB @ 1 KHz relative to 1V/Pa
  
  RECEIVER: Type -> Dynamic
  Internal Impedance -> 300Ω @ 1 Khz
  SPL->108 dB @ 1 Khz
  
  
  LINE AMPLIFIER SECTION:
  Input Sensitivity -> 1 mV to 5mV (adjustable) Input Impedence ->4,7 K (resistive) Load Impedence -> 250Ω, Balanced (Resistive)
  Output-> 2V RMS
  Distortion <1% @ 1 KHz
  Residual Noise Level -50dB
  Frequency Response 200 Hz - 10 KHz, ± 3 dB
  Gong tone Frequency 600 Hz ± 100 Hz
  Gong tone Duration 1.5 Secs (app.)
  
  
  POWER AMPLIFIER SECTION:
  Input Sensitivity 500 mV RMS @1 KHz
  Input Impedence 250Ω (resistive)
  Distortion <1% @ 1 KHz
  Residual Noise Level -60dB
  Frequency Response 200 Hz - 10 KHz, ± 3 dB 
  Output Power 15W RMS @ 1KHz
  Production   Short Circuit & Thermsl Overload.
  
  
  POWER SUPPLY:
  Supply voltage  90-270v AC.
  Power Consumption - 24VA.

• FEATURES:
  
  1. Frequency Response 200Hz - 10KHz
  2.  THD <1% 
  3. Body LM6 Aluminium alloy 
  4. Power Supply 90 - 270V AC 50Hz. 
  5. Page power 6W rms Class-D amplifier.
  6. Alert Tone 
  7. Audio Paging and Talk-back.
  
  Noise canceling type Handset for duplex communication. 
  
  
  Application & Usage: The Wall mounting Handset station is part of the audio paging & talkback communication system employed in process industries for purpose of passing instructions to field operators and for emergency / safety announcements.
  
  Accessories:
  
  • Station junction box - 1 No.
  • Horn speaker unit - 1 No.
  • Speaker junction box - 1 No.
  • Powder Coated MS Canopy type enclosure - 1 No.
  
  MICROPHONE:
  Type-> Dynamic,NoiseCanceling
  Internal Impedance->300Ω @ 1 KHz Sensitivity -> 56 dB @ 1 KHz relative to 1V/Pa
  
  RECEIVER: Type -> Dynamic
  Internal Impedance -> 300Ω @ 1 Khz
  SPL->108 dB @ 1 Khz
  
  
  LINE AMPLIFIER SECTION:
  Input Sensitivity -> 1 mV to 5mV (adjustable) Input Impedence ->4,7 K (resistive) Load Impedence -> 250Ω, Balanced (Resistive)
  Output-> 2V RMS
  Distortion <1% @ 1 KHz
  Residual Noise Level -50dB
  Frequency Response 200 Hz - 10 KHz, ± 3 dB
  Gong tone Frequency 600 Hz ± 100 Hz
  Gong tone Duration 1.5 Secs (app.)
  
  
  POWER AMPLIFIER SECTION:
  Input Sensitivity 500 mV RMS @1 KHz
  Input Impedence 250Ω (resistive)
  Distortion <1% @ 1 KHz
  Residual Noise Level -60dB
  Frequency Response 200 Hz - 10 KHz, ± 3 dB 
  Output Power 15W RMS @ 1KHz
  Production   Short Circuit & Thermsl Overload.
  
  
  POWER SUPPLY:
  Supply voltage  90-270v AC.
  Power Consumption - 24VA.

• FEATURES:
  
  1. Frequency Response 200Hz - 10KHz
  2.  THD <1% 
  3. Body LM6 Aluminium alloy 
  4. Power Supply 90 - 270V AC 50Hz. 
  5. Page power 6W rms Class-D amplifier.
  6. Alert Tone 
  7. Audio Paging and Talk-back.
  
  Noise canceling type Handset for duplex communication. 
  
  
  Application & Usage: The Wall mounting Handset station is part of the audio paging & talkback communication system employed in process industries for purpose of passing instructions to field operators and for emergency / safety announcements.
  
  Accessories:
  
  • Station junction box - 1 No.
  • Horn speaker unit - 1 No.
  • Speaker junction box - 1 No.
  • Powder Coated MS Canopy type enclosure - 1 No.
  
  MICROPHONE:
  Type-> Dynamic,NoiseCanceling
  Internal Impedance->300Ω @ 1 KHz Sensitivity -> 56 dB @ 1 KHz relative to 1V/Pa
  
  RECEIVER: Type -> Dynamic
  Internal Impedance -> 300Ω @ 1 Khz
  SPL->108 dB @ 1 Khz
  
  
  LINE AMPLIFIER SECTION:
  Input Sensitivity -> 1 mV to 5mV (adjustable) Input Impedence ->4,7 K (resistive) Load Impedence -> 250Ω, Balanced (Resistive)
  Output-> 2V RMS
  Distortion <1% @ 1 KHz
  Residual Noise Level -50dB
  Frequency Response 200 Hz - 10 KHz, ± 3 dB
  Gong tone Frequency 600 Hz ± 100 Hz
  Gong tone Duration 1.5 Secs (app.)
  
  
  POWER AMPLIFIER SECTION:
  Input Sensitivity 500 mV RMS @1 KHz
  Input Impedence 250Ω (resistive)
  Distortion <1% @ 1 KHz
  Residual Noise Level -60dB
  Frequency Response 200 Hz - 10 KHz, ± 3 dB 
  Output Power 15W RMS @ 1KHz
  Production   Short Circuit & Thermsl Overload.
  
  
  POWER SUPPLY:
  Supply voltage  90-270v AC.
  Power Consumption - 24VA.

• FEATURES:
  
  1. Frequency Response 200Hz - 10KHz
  2.  THD <1% 
  3. Body LM6 Aluminium alloy 
  4. Power Supply 90 - 270V AC 50Hz. 
  5. Page power 6W rms Class-D amplifier.
  6. Alert Tone 
  7. Audio Paging and Talk-back.
  
  Noise canceling type Handset for duplex communication. 
  
  
  Application & Usage: The Wall mounting Handset station is part of the audio paging & talkback communication system employed in process industries for purpose of passing instructions to field operators and for emergency / safety announcements.
  
  Accessories:
  
  • Station junction box - 1 No.
  • Horn speaker unit - 1 No.
  • Speaker junction box - 1 No.
  • Powder Coated MS Canopy type enclosure - 1 No.
  
  MICROPHONE:
  Type-> Dynamic,NoiseCanceling
  Internal Impedance->300Ω @ 1 KHz Sensitivity -> 56 dB @ 1 KHz relative to 1V/Pa
  
  RECEIVER: Type -> Dynamic
  Internal Impedance -> 300Ω @ 1 Khz
  SPL->108 dB @ 1 Khz
  
  
  LINE AMPLIFIER SECTION:
  Input Sensitivity -> 1 mV to 5mV (adjustable) Input Impedence ->4,7 K (resistive) Load Impedence -> 250Ω, Balanced (Resistive)
  Output-> 2V RMS
  Distortion <1% @ 1 KHz
  Residual Noise Level -50dB
  Frequency Response 200 Hz - 10 KHz, ± 3 dB
  Gong tone Frequency 600 Hz ± 100 Hz
  Gong tone Duration 1.5 Secs (app.)
  
  
  POWER AMPLIFIER SECTION:
  Input Sensitivity 500 mV RMS @1 KHz
  Input Impedence 250Ω (resistive)
  Distortion <1% @ 1 KHz
  Residual Noise Level -60dB
  Frequency Response 200 Hz - 10 KHz, ± 3 dB 
  Output Power 15W RMS @ 1KHz
  Production   Short Circuit & Thermsl Overload.
  
  
  POWER SUPPLY:
  Supply voltage  90-270v AC.
  Power Consumption - 24VA.